Dehumidifying Dryers




Honeycle Dehumidifiers
Europe Design, CE Version

The SD-H series honeycomb dehumidifiers are mainly use to dry hygroscopic engineering plastics. A honeycomb-rotor is use in this series to offer effective drying. We offer two types of honeycomb rotors: H4 and H5 models that, under ideal conditions, can supply dehumidified dry air with a dew-point down to -40˚C and -50˚C respectively. The SD-H series offers accurate P.I.D temperature control as standard, with LCD touch screen and dew-point monitor as optional features. This series comprises 14 models of honeycomb dehumidifiers, the largest of which can provide dry air up to a volume of 3000m3/hr.
Features

This series use P.I.D temperature control system, has regenerating temperature settings and real temperature settings and real temperature display function

Two types of honeycomb rotor with different dehumidified capacity and effect: H4 and H5 models available

Under ideal conditions, H5 models can supply dehumidified dry air with a dew-point down to -50˚C

Equips with dehumidifying heater and temperature control gauge as options to dry and dehumidify the raw material
The dehumidifying system of the SD-H series features two condensers to ensure a low return air temperature and low dew-point
Main power switch with mechanical chain lock function (model above SD700H)





3-in 1 Dehumidified Compact Dryer
Europe Design, CE Version

The 3-in-1 Dehumidified Compact Dryers combine drying, dehumidifying and two-stage conveying functions in a single unit. They are suitable for drying hygroscopic engineering plastics, such as PA, PC, PBT, PET, etc. A honeycomb rotor is used in the dehumidifying section.
Features

SCD series compact dryers are equipped with honeycomb rotor for dehumidifying. They have two kinds of design: fully-integral and semi-integral, depending on the size

Suitable for drying hygroscopic engineering plastics such as PA, PC, PBT, PET, etc. Either H4 or H5 honeycomb-rotor can be specified according to requirement

Integration of dehumidifying, drying, and two-stage conveying functions in a single unit. Three-stage conveying is also available as an option

Material processing is controlled via microprocessor as standard with touch screen PLC control as an option for centralized and automatic operation

Dew-point monitor can be fitted to monitor and display dry air dew-point

Insulated drying hopper features dry air down-blowing and cyclone exhaust design. This improves drying efficiency and reduces energy consumption whist maintaining a steady drying effect
Compact in size for ease of movement and space saving
Closed-loop conveying system eliminates the possibility of moisture re-absorption during material conveying
Equipped with pneumatic shut-off valve to ensure no material remains in the material line after each loading cycle

The dehumidifying section of SCD series features two condensers to ensure a low return air temperature and low dew-point