Granulators

AME Granulator c/w Powder Separation System
This series of granulators are suitable for centralized re-cycling of wastes or rejected parts from injection moulding, blow moulding and extrusion lines. It is built with powder separation system to sieve the excessive powder or fine granule during crushing. The purpose of “de-powder” the crushed material is to enhance a better result for the recycled material to be used back for cost saving, minimize black dots and improve quality. The PSS can be easily removed to allow it to operate like a normal granulator without dismantle.
Features
Double layers stainless steel hopper for soundproof effect

Rotor shaft and rotor block are treated to prevent rusty

High quality blades ensure durability

Equipped with safety devices
Easy to access for the convenience of maintenance and cleaning


Granulator (B series)





Sound Proof Granulator
Europe Design, CE Version

Sound-proof central granulators are suitable for centralized recycling of wastes or rejected parts from injection moulding, blow moulding and extrusion lines. The machines feature optimizing structure, easy grab and cut through materials. This design makes the machine works more efficiently and can reduce waste of energy to the minimum.
Features

Compact size with attractive appearance and no material contamination

High quality blades ensure durability

Staggered blades design can decentralize working load when granulating to increase cutting efficiency

Blades retainer is designed for quick blades changing without re-adjustment
Adjustable angle of material inlet chute for easy material feeding from belt conveyors
Full-closed design and sound-proofing ensure low noise level
Equipped with motor overload relay and multiple safety devices
Easy to access for the convenience of maintenance and cleaning
Cyclone dust separator can effectively remove the dust from regrind
Dust collecting bag brings easiness of dust cleaning
Regrind conveying system as standard





Single-Shaft Tearing Crusher

The WT range of high performance crushers are based on the latest machine concept can solve the lump and purging problems of plastic granulator.

Large amount of lump or purging can be fed into the hopper which the hydraulic ram pressed the material against the rotating rotor. The hydraulic ram will retreat whenever the feeding is overload. The rotating rotor which housed the knives along the shaft will tear the material into small pieces and allow it to pass the screen size perforation determines the size of the torn materials.
Features

The concave cutting knives can be turned 4 times and guarantees a precise cut at high throughput rate

Special knife holders are welded into the milled knife pockets around its circumference

The ram is fitted with scraper rails which prevent any unwanted materials from being pulled between the ram and the machine frame.

Equipped with safety devices





AME Low Speed Granulator
Europe Design, CE Version

Low speed granulators are suitable for by-the-press recycling of sprues. They feature easy operation, excellent performance, low noise and dust level. They are in “Euro” Style design and compact in size. High quality blades ensure long-life span. High security grade also conforms with CE safety standard.
Features

High safety grade design

Small in size with castors for easy moving

Best shear angle ensure the efficiency of material granulating

Low speed and soundproof material hopper brings a quieter operation environment
Staggered blades can increase working efficiency and at the same time reduce energy consumption
Well-proportioned granules and low dust level
Easy to access for easy maintenance and cleaning
Low granulating speed and sharp angle design of rotating blades are helpful for smooth and continuous operation





Teeth-Cutter Granulator
Europe Design, CE Version

SG-14 series screenless granulators operate in super low speed. Teeth cutters and cutting blades work together to reduce materials into well-proportioned granules. There are least dusts produced in the cutting process. Multiple security devices ensure high safety grade; automatic reverse function ensures continuous operation. It is mainly used for by-the-press recycling of sprues fed by pickers. Regrind can convey back to moulding machines for reuse by instant recycling device.
Features

German made gear motor features steady performance, long life, and high torque

Teeth cutters and cutting blades are integrally fitted in one cutting chamber. Staggered blades make the initial cutting and teeth cutters reduce the materials into desired size. Regrinds could be used with virgin materials

Screenless design, well-proportioned size of regrinds and least amount of dusts

Low speed, low noise level, and low energy consumption
When motor blockage occurs, the machined will alarm visibly and enable motor reverse function. It resumes normal operation automatically after the trouble is clear
“Euro” style appearance and compact in size for space saving and ease of cleaning

Motor shaft and rotor shaft are connected by shaft coupling thus ensuring smooth cutting action and convenient motor replacement
Transparent acryl-glass feeding hopper